|
QIMAGING DIGITAL CAMERAS
|
|
All QImaging
cameras are FireWireTM IEEE 1394 interfaced
and come with QCapture Software for high
speed performance preview and capture functions. QImaging
cameras will operate on both Windows® and Mac® based systems. A
Software development kit is available for easy interfacing with custom
software. QImaging cameras are compatible
with a large selection of life science and industrial software for microscope,
machine vision and video streaming applications.
|
|
|
Monochrome
digital camera designed for low-light, high-speed and high-sensitivity
photography in life science applications such as FRET, FRAP, FISH, quantitative
fluorescence microscopy, live cell fluorescent protein imaging, ratiometric
analysis (Ca+2, pH, etc.) and whole animal fluorescence.Features
include 1392x1040 pixels, 6.45um x 6.45um, 2/3" optical format, sensor
readout noise 8e-, dark current 0.05e/pix/s cooled, electronic shutter,
binning up to 8x8, ROI, cooling -30°, regulated; and external trigger. |
|
|
New
for high dynamic, low-light fluorescence and polarization applications, QImaging
presents the Rolera MGi Plus digital camera.Great
for high speed, low light imaging, spinning disk confocal microscopy, dynamic
ratio imaging (e.g. pH and low-concentration flux) and live cell fluorescent
protein imaging, this camera features:512x512
pixels, 16um x 16um pixel size, extremely high sensitivity for demanding
low-light and fluorescence imaging, back illuminated EMCCD chip, binning
up to 6x6, traditional mode and EMCCD mode, EM gain stability delivers
improved quantitative capabilities, FPGA based technology supports potential
future upgrade paths, built-in 'anti-aging technology' greatly extends
lifetime of the camera's EMCCD and PVCAM which provides instant compatibility
with many advanced imaging software packages. |
|
|
QImaging is proud
to introduce the Rolera EM-C2, the latest addition to its line-up of high-speed,
high-sensitivity cameras. This camera is specifically designed to detect
extremely low light levels at super-high frame rates with unparalleled
spatial resolution. It enables life science researchers to take high-resolution,
low-light video rate images capturing events never seen before. The
Rolera EM-C2 also introduces the Easy-EM mode, which optimizes camera EM
Gain settings with a single click. Application of EM Gain boosts the signal-to-noise
ratio, enabling researchers to acquire clear images under extremely low-light
conditions. |
|
|
For
high precision quantitative analysis in low light/brightfield/darkfield/
fluorescence imaging in life science and industrial applications. |
|
|
QImaging's
EXi Aqua™ camera is a multi-talented, user-friendly laboratory workhorse
that is ideal for the busy lab. Designed to address varied imaging requirements
it supports high resolution brightfield imaging to low light fluorescent
protein imaging.The camera is cooled to 0 degrees C, boasts enhanced sensitivity,
high resolution, a broad spectral response and approximately 20% less read
noise than its predecessor.Easy to use, the EXi Aqua can be installed and
operational within minutes and features an optimized IEEE 1394b "Firewire"
interface and simple, versatile software. Available with a Bayer mask color
CCD option. |
|
|
The EXi Blue™ camera
was designed specifically to assist life science professionals in the study
of processes within live cells. The camera delivers fast frame rates, high
sensitivity and exceptional temporal resolution. Easy to use,
the EXi Blue camera can be installed and operational within minutes. It
features an optimized IEEE 1394b "Firewire" interface and simple, versatile
software. The EXi Blue is a versatile tool for the busy lab,
truly 3-cameras-in-one small, lightweight package. It's a fast, high sensitivity
monochrome camera ideally suited to live cell imaging of fluorescent proteins.
It can be used with the optional QImaging RGB filter and then become a
rapid-speed, high resolution color camera. |
|
|
High
resolution 3.3 and 5.0 mega-pixel digital
color CCD cameras designed for publication and documentation applications.
For high quality color capture of still images in microscopy and optical
lens systems. Models available are color, cooled/uncooled.
Fully computer controlled with electronic shutters. |
|
|
For
use in combination with QImaging monochrome
cameras to create high quality color images. The RGB slider allows for
easy switching between monochrome and color and the RGB non-slider is compact
and easy to remove. |